73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Performance => Topic started by: 1LOW4X4 on March 04, 2011, 09:24:40 AM
-
hey guys, I've about got everything figured out except the flange.
What I have is a Hooker header with a flange on it already.
(http://i35.photobucket.com/albums/d185/nickboudro/hooker.jpg)
What I need is to buy a flange that will fit on a 2.5" pipe, and bolt up to those headers. Like this.
(http://i35.photobucket.com/albums/d185/nickboudro/need1.jpg)
I see they sell a few different flanges on summit, but I cant find what im looking for.
In the pic above (with the red circle) is that a flange on just a reducer, and then welded up to pipe? How do you get the flange to hold on the the reducer if there's no lip?
-
Well crap. Just found these....is this what I need?
3 bolt flange, 2.5", and I'd just bolt it up to the header (with a gasket) and then weld my pipe to that?
http://www.summitracing.com/parts/HOK-11026HKR/?rtype=10
-
And what do yall think about these gaskets?
-
That's what you need. Make sure you bolt up the reducers first and work your way back when you make the pipes.
I use similar to these
http://www.summitracing.com/parts/PHP-66001/
-
Thanks bud I appreciate the help. I was looking at these copper gaskets, I just forgot to post the link.
(http://i35.photobucket.com/albums/d185/nickboudro/copper.jpg)
-
I have a set of brand new reducers that I didnt use when I built my exhaust. let me know!