73-87 Chevy _ GMC Trucks > Engine/Drivetrain
Head Gaskets
(1/1)
bigben5054:
1979 K20 with 350 engine. Newly rebuilt. Had a little valve issue initially, but we are on the mend now. I measured the piston depth in the cylinder and I am at .026. I bought the Fel Pro 1094 steel shim head gaskets that are .015 thick, which puts me at .041. The instructions that came with the gaskets talk about needing a very smooth surface in order for the gaskets to not fail. It goes on to say that if they are not smooth, coat both sides of the gaskets with a sealer. My block is basically fresh from the machine shop and heads are super clean, so I think I'm good. But, I have a can of copper spray gasket sealer, so any harm in spraying them just for extra insurance? Will the copper spray increase the thickness of the gaskets to any concern?
VileZambonie:
Yes, use the copper spray on the steel shim gaskets.
JohnnyPopper:
No thickness issues.
Go forward with copper spray.
I have used it for years with great success.
bigben5054:
Thanks guys.
Navigation
[0] Message Index
Go to full version