Author Topic: shifting to low 4x4  (Read 1896 times)

Offline zooracer

  • Newbie
  • Posts: 4
shifting to low 4x4
« on: September 29, 2004, 12:46:00 PM »
I have an 81 with the full time hubs.  
I can easily shift down to 4 high, but it will not go down from there to 4 lo.
Any suggestions?
matt


Offline bigblue86

  • Newbie
  • Posts: 12
Re: shifting to low 4x4
« Reply #1 on: September 29, 2004, 09:45:00 PM »
did you check your linkage at the transfer case?
I used to have a 79 blazer with full time and the linkage got loose once and gave me similar problems


Offline zooracer

  • Newbie
  • Posts: 4
Re: shifting to low 4x4
« Reply #2 on: September 30, 2004, 09:13:00 PM »
Ok, will check the linkage out.  Maybe just try to adjust it...
Thx


Offline biggmcguy

  • Newbie
  • Posts: 4
Re: shifting to low 4x4
« Reply #3 on: November 27, 2004, 12:08:00 AM »
make sure that when you shift to 4 lo that the tranny is in neutral