73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Performance => Topic started by: doctrdoo on June 24, 2005, 02:44:00 AM
-
i have a 85 C-10 with a 350 cid motor.i just put headers and a dual exhaust kit on it. my only problem is that the bracket that goes onto the power steering pump( the one that attaches at the front-on the driver side of motor) wont fit over the headers so i cant get the pump tightened up. does anyone have any suggestions? thanks
-
Cut the rear hole off the bracket. Put a spacer on the front header bolt to put the bracket back to the origional location and bolt the bracket down to the header. Sorry I'm low tech so I don't have a digital camarea to take pictures of the finished product.
RH