« previous next »
Pages: [1]   Go Down

Author Topic: 97 chevy 350 heads  (Read 2842 times)

Offline plowking_90

  • Registered Users
  • *
  • Posts: 124
97 chevy 350 heads
« on: March 25, 2008, 06:58:44 PM »
will 97 chevy vortec 350 heads fit a 93 305recently got a truc need a motor just wanna se if they will fit
Logged

Offline joesgarage71

  • Wrench
  • Senior Member
  • ****
  • Posts: 1157
Re: 97 chevy 350 heads
« Reply #1 on: March 25, 2008, 08:11:27 PM »
yup
 they will bolt to the block, and will need a vortec intake manifold if you plan to use them with a carb, the 93 TBI manifold will not work.
 Steve
Logged
78' K-20 355/SM465/twin stick 205 6" on 36's
14 bolt FF/big bearing Dana 44 4.56 gears
92' GMC C-1500 454/4L80E/14 bolt

Offline plowking_90

  • Registered Users
  • *
  • Posts: 124
Re: 97 chevy 350 heads
« Reply #2 on: March 25, 2008, 08:13:04 PM »
the vortec 350 is still in the truck so i have everything tp put it back together thanks for the help
Logged

Offline red4wd

  • Registered Users
  • *
  • Posts: 240
Re: 97 chevy 350 heads
« Reply #3 on: March 25, 2008, 09:02:34 PM »
The intake on the vortec is for multiport fuel injection...so you will need to get a tbi intake specifically for the vortec heads...or vortec dual plane intake and a throttle body adaptor...also the vortec heads have no provision for the the egr valve.





Logged

Offline plowking_90

  • Registered Users
  • *
  • Posts: 124
Re: 97 chevy 350 heads
« Reply #4 on: March 26, 2008, 03:25:34 PM »
i have the vortec intake and head from the old motor im gonna put them on the 93 motor
Logged
Pages: [1]   Go Up
« previous next »