73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Instrumentation => Topic started by: Mike81K10 on April 21, 2024, 11:16:10 PM
-
I don't have a tac in my truck, guess some came with it. Any recommendations for installing an after market tac.
-
What do you have for factory gauges?
-
Hey Mike, it's now called a tacho. Just fyi... ;D
-
The gauges I currently have is: Speedo, Fuel, Oil, Bat, Temp, and a Clock. I figure I will need a tachometer gauge with my new engine. Would not mind removing the clock, just don't think it will fit there. My Speedometer and Fuel are the large gauges.
-
Popular retrofit is the small fuel gauge and tach in place of the fuel gauge and then you can keep oem gauges.
-
Can you tell me where I can get a good quality Tach that will fit where the clock is located? That would be awesome! How about the forum store?
-
Can you tell me where I can get a good quality Tach that will fit where the clock is located? That would be awesome! How about the forum store?
They dont make a small tach for the smaller locations, just a fuel for the small side and a tach to replace the large fuel gauge.
We dont currently sell the factory replacement style gauges, we sell Dakota Digital Gauges instead: http://store.73-87chevytrucks.com/merchant2/merchant.mvc?Screen=CTGY&Store_Code=7&Category_Code=7G
.
-
Hard to make out! Does the large gauge on right in the RTX-79C-PU have the RPM? Also does the stock harness connect to these or do you have to do some rewiring?
-
RPM on the right, speedo left, all of these require wiring to a control box.
This is both the Dakota and LS wiring in my personal truck http://forum.73-87chevytrucks.com/smforum/index.php?topic=12120.60 (http://forum.73-87chevytrucks.com/smforum/index.php?topic=12120.60)
It is very simple process and comes with all the required sensors
VHX Style:
(https://www.dakotadigital.com/cartimages/prd_ssh_3648_9872.jpg?id=202110201030450)
79-87(91) RTX style:
(https://www.dakotadigital.com/cartimages/prd_ssh_4365_8410.jpg?id=202107221205540)
HDX Style:
(https://www.dakotadigital.com/cartimages/prd_ssh_3143_10677.jpg?id=202109010933530)
-
RTX Looks best, but I'm old skool.
-
RTX = Retro, they were modeled after the original dash layouts for each year split. 73-75. 76-78, 79-87(91)
I prefer the look of these also. I am only showing as Mike asked and this is the reason we don't offer factory replacement
-
Not sure how much work it will take to install. However I like the RTX gauges. I noticed on the Dakota WEB site they say you can add 16 extra gauges. I did not look at all of it yet but will look into it and what is all involved to install it. Many color options as well!
-
If you understand wiring it is a pretty simple install. I have All the RTX gauge sets in stock, when you are ready just email me webmaster@73-87chevytrucks.com
-
Thanks!