what do they do and where can i get them??
82 K10, 355 with quadrajet, th350
still trying to get my choke properly functioning. i figured i would go through a checklist and find whats working and whats not. i turned the key on, without starting the truck and watched the choke blades open, so i know that the coil works. I then began checking all linkeages and movement of parts. all there and move freely.
then i came across the rear vacuum break assembly. figured it had a vacuum line to it so i should test it. put my vacuum tool thingy on it and pumped up the vacuum. it didn't hold a vacuum, and the plunger didn't go into the assembly. i figured the vacuum would suck the plunger in, and at least open the choke a little, but no go. any help is greatly appreciated.
the T.v./ detent cable snapped while working on all this other stuff, so now i have to replace that too. any hidden problems when replacing one?
on the bright side, i got my drivers side gas tank down for repairs!! (new straps, lines, sending unit)
thanks
phil