73-87chevytrucks.com
General Site Info => Welcome => Topic started by: AngrySailor on September 21, 2023, 06:03:51 AM
-
Sup fellas, just joined up. I’ve had this truck since almost new, started out 305tbi automatic, she’s been through a couple different nasty big blocks over the years, 489,496, got a decent ‘54 in her now, 10.3:1, 990’s, small solid roller pump gas motor. Also has a Ford 9”, 4.56’s, super t-10. Fun truck, I’m going to be doing some more suspension work figured ya might get a kick outta my project.
Cheers
AS
-
Welcome from Tucson AZ 8)
-
Welcome from AL! Look forward to pics of your truck!
-
Thanks guys. Having a hard time posting pics from my iPhone (stupid phone). Wrong format... hard the tranny out twice last phone days Messi NGK with the hydraulic throw out bearing. Out for a rip rn.
-
Welcome from SoCal San Diego!
Search for a program on this site called PIXresizer
It will shrink them to workable sizes.
-
k think I figured how to convert to jpeg and save as Joey from here out. So I drove the truck some this fall, first time in nearly 20 years. Built a fairly angry 454 from stuff kicking around and she worked real well. Have tons of pics of the engine machining/build if you’re interested. I couldn’t get a roller pilot bushing and installed a bronze one, probably a little too tight and didn’t soak in enough oil cuz it trashed and took out my input and release sleeve/ bearing retainer. Made one up and still have input noise, figure the shaft is tweaked. Was going to order T-10 parts when something else came along...
MODS. WTH JPEG isn’t even supported? I can’t be bothered with a site that can’t accept standard pictures.
Sorry guys, no Lenco, four link, tubbed action for you I guess.
Peace AS
-
JPEG is supported, as are several other file formats. The file size is limited. You can use any JPEG editor that can proportionally change/decrease file size while maintaining the aspect ratio of the image.
-
JPEG is supported, as are several other file formats. The file size is limited. You can use any JPEG editor that can proportionally change/decrease file size while maintaining the aspect ratio of the image.
doesn’t work. Don’t have any problems elsewhere on forums. 500kb limit? At least I’m. It getting the .JPEG not supported error
Test again
-
I had to email that to myself. I’m not doing that for 300 photos and counting. It’s sized for ants like 200kb was my only option under the limit.