Author Topic: C- notch?  (Read 447 times)

Offline Terryr85

  • Newbie
  • Posts: 44
C- notch?
« on: March 20, 2017, 07:08:42 PM »
So I'm dropping the rear down on a C20, I've though about just going spring under but I'm not sure how far that will drop me and if it'll be far enough that I need to add a C notch. Anyone gone spring under and have some info?
73 K20 RC/LB, D60, 14bolt, 5.3l, NV4500

Online SkinnyG

  • Registered Users
  • *
  • Posts: 198
  • Reducing resale value since 8-track days
Re: C- notch?
« Reply #1 on: March 20, 2017, 08:58:10 PM »
I flipped my C10.  In my opinion (and I don't know if the C20 frame rails are taller or not), the frame doesn't need to be notched, because the pumpkin will hit the bed floor before the axle tubes will hit the frame.
The Crusty Chevy: 1977 Silverado, shortboxed & dropped, potato-potato.

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 16364
Re: C- notch?
« Reply #2 on: March 21, 2017, 08:27:44 AM »
I ran a flip with adjustable shackles without notching but if you want to go any lower you will need to.
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)