« previous next »
Pages: [1]   Go Down

Author Topic: 5 lug to 6 lug:  (Read 2260 times)

Offline Stewart G Griffin

  • Senior Member
  • ****
  • Posts: 3324
5 lug to 6 lug:
« on: June 06, 2017, 08:35:47 PM »
Which 6 lug rotors, if any, will fit 1/2 ton spindles?

Or, if different spindles are required to switch to 6 lugs, then which spindles, if any, will fit 1/2 ton A-arms?

This is for the front, we'll worry about the rear later.
Logged

Offline m3talc0re

  • Registered Users
  • *
  • Posts: 174
  • Newbie
    • Burning Concept
Re: 5 lug to 6 lug:
« Reply #1 on: June 07, 2017, 05:41:00 AM »
I would like to know this, too. Rear as well.6 lug rims seem to be a lot easier to find that 5 lug -_-
Logged

Offline Irish_Alley

  • Tim
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 13319
  • Family is not an important thing. It's everything.
Re: 5 lug to 6 lug:
« Reply #2 on: June 07, 2017, 05:08:30 PM »
since gm never offered 2wd 6 lugs till 99 nothing with work afaik.
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7543
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: 5 lug to 6 lug:
« Reply #3 on: June 07, 2017, 05:43:24 PM »
Check with the 60-66 groups, I see all kinds of posts putting 6 lug rotors on.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18368
    • http://www.73-87chevytrucks.com
Re: 5 lug to 6 lug:
« Reply #4 on: July 19, 2017, 09:11:23 PM »
The 71-72 C10's used 6 lug rotors.  They make some to fit the 73-87 also.  If you are doing it on the cheap get the 71-72 rotors and spindles and swap them.
Logged
Pages: [1]   Go Up
« previous next »