73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: snibook7537 on November 22, 2011, 01:28:49 AM
-
I was just looking and saw a bracket for the quad shocks. I've only saw one truck with these before and was told they were a factory option. I am just wondering if those brackets bolt up to a regular frame with only 1 shock per side. Also is there really any advantage to them, to they help with the ride, control, something? Just wondering if I could go ahead and buy the brackets, shocks, and hardware and see an improvement over a stock regular setup with just the two. By the way the truck is an 85 K-10 shortbed with a 6.2 I'm going to likely put a plow on it for some light use( my driveway, grandparents, family etc...) I will also be putting an add-a-leaf on the front as well. So basically does this actually do something or does it just look cool.
Thanks in advance
Vince
-
My 1990 Suburban had quads on it but it got taken off because it rode too bouncy. It rides a lot better with the singles.
-
The brackets bolt to a regular frame but of course you'll have to drill some holes. I don't think they are necessary unless you are running bigger tires (35's and over), or using a bunch of heavy duty applications. I would just go with a quality set of gas shocks. If you don't like how it feels with the plow on then you could consider it, but until then I wouldn't bother with the quad shocks
-
I put the quad shocks on my sled puller.
As far as a street truck I'm sure a good set of singles will do just fine.
However, if you do deceide to add the factory quad shocks the holes should already be in the frame for the brackets.
-
The purpose of having multiple shocks is to disperse the load and heat buildup into multiple bodies. Repeated rapid cycling of the shocks generates heat which can cause aeration of the fluid, resulting in weakened shock absorption. Having multiple shocks, spreads the load of those cycles into multiple bodies of fluid resulting in longer more predictable shock absorbing.
-
I'll probably hold off on them for now. I've got a set of 1 ton axles that I want to put under her this coming summer so I might not even worry about it until then.