« previous next »
Pages: [1]   Go Down

Author Topic: old bolts...  (Read 2756 times)

Offline markzepp820

  • Registered Users
  • *
  • Posts: 128
old bolts...
« on: March 07, 2006, 03:39:00 AM »
does anyone know how hard it is to remove the spring to eye bolts on leaf springs? they look pretty hard to get off. Should i use a torch? 79' C20

Logged

Offline Lt.Del

  • Andy aka:SgtDel
  • Senior Member
  • ****
  • Posts: 3864
  • DelbridgePhotography.com
    • www.delbridge.net
old bolts...
« Reply #1 on: March 07, 2006, 12:40:00 PM »
You should be able to put a 1/2 inch drive ratchet on it, maybe w/ a long pipe slipped over the handle.  I have a 3/4 inch drive set i am sure that baby will come off w/ that.

If you still have trouble, it woldn't hurt to heat that puppy up.

SgtDel

Logged

Offline cooltoolguy

  • Newbie
  • Posts: 84
Re: old bolts...
« Reply #2 on: March 08, 2006, 08:44:00 AM »
just keep the garden hose handy,  the bushings have a way of catching on fire with a torch.  but like the Sarg. said a little rust bust spray and a large pipe usually works,  just watch the knuckles.

Logged

Offline markzepp820

  • Registered Users
  • *
  • Posts: 128
thanks
« Reply #3 on: March 16, 2006, 06:15:00 PM »
thanks

Logged

Offline 1976Scottsdale

  • Junior Member
  • ***
  • Posts: 760
Re: thanks
« Reply #4 on: March 17, 2006, 10:06:00 PM »
Really, other than getting them broken loose, I have never had any trouble at all getting them to come out with anything but a small hammer and a punch.

Logged
Pages: [1]   Go Up
« previous next »