Author Topic: Headliner question  (Read 4237 times)

Offline 84chvy

  • Registered Users
  • *
  • Posts: 118
Headliner question
« on: January 28, 2012, 06:51:52 PM »
but mine doesnt have a headliner or the trim peices that come down to the dash. it wont work without them right?

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18369
    • http://www.73-87chevytrucks.com
Re: Headliner question
« Reply #1 on: January 30, 2012, 10:45:24 PM »
Not sure why this was in the pillar pod post, but what exactly are you asking.  Aftermarket headliners don't use any of the factory stuff.

Offline bake74

  • Senior Member
  • ****
  • Posts: 5871
    • Build Thread
Re: Headliner question
« Reply #2 on: January 31, 2012, 06:28:08 AM »
     I believe he was asking since his truck did not come with a factory headliner or the A-pillar pieces, if he could still install the pillar pods with gages that you are making.
      I was wondering the same thing, though I would think you would be able to, or do you need to get all the pieces to install the trim and headliner in order for the pillar pod you are making to stay in place ?
#1: The easiest and most obvious solution to any problem is 99% of the time correct.
#2: There is no such thing as impossible, it just takes longer.
  74 k10, 77k10    Tom

Offline winky

  • Junior Member
  • ***
  • Posts: 509
Re: Headliner question
« Reply #3 on: January 31, 2012, 08:30:00 AM »
if not he could always just use one pillar could he not? two screws and its on.

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18369
    • http://www.73-87chevytrucks.com
Re: Headliner question
« Reply #4 on: January 31, 2012, 04:50:04 PM »
For the first round you have to have an a-pillar to connect it to.