73-87 Chevy _ GMC Trucks > Suburbans
Rear A/C fan housing for '89 Suburban
skylark68:
The rear A/C on my Suburban works fine, but the fan motor housing is cracked and the fan rubs badly even on low. I've looked and looked, but can't find a source online for a replacement. I tried to pop rivet it back together and it held for a little while but then the fan started rubbing again. It's cracked and broken where the bolts hold the upper and lower assemblies together. I guess at one time someone working on the Suburban was rough with it. Any ideas on where I could find one? I guess if nothing else I can start looking in junkyards.
bake74:
If you have no luck on line, I would try a pick-n-pull type first, they will be cheaper than say a full on recycle yard.
skylark68:
Thanks, that's a good idea. I'll probably start hunting this weekend. It's getting hot quick here in Texas and that rear A/C really helps out when it's working.
P.S. Does anyone know how the upper assembly is bolted to the ceiling of the cab? I never took it that far apart.
Captkaos:
Should be bolted into the roof ribs.
BlackTomC:
Curious to know, how'd this all turn out? I'm currently refurbishing/fiberglassing the new housing and trim piece for the rear AC and have ALL the components to make it work (all removed by myself).
Navigation
[0] Message Index
[#] Next page
Go to full version