Author Topic: Spindle comparison: HD vs Std and lower vs Stock  (Read 9534 times)

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18407
    • http://www.73-87chevytrucks.com
Spindle comparison: HD vs Std and lower vs Stock
« on: March 17, 2015, 09:29:21 PM »
Pictured are a HD dropped spindle and a std stock spindle.  Note the HD takes a 1.25" rotor and the std takes a 1" rotor.  All 1973-1980 trucks had 1.25" rotors, the 1" rotor was introduced in 1981.  They take different calipers and bearings. Measurements are shown for comparison.  The drop spindle is 2.5"