Side exit exhaust. Anyone have this?

[jarhead79]

I'm need to cut off the rear half of my exhaust because it's rusted and full off holes, I can pick the rust off in chunks and it leaves a hole so it's time to upgrade a little. Anyone have pics of their side exit exhaust setups?!

[Bishop1989]

I took these tips off and I'll have new ones on it this weekend.

[FlatBlack77]

here is mine. 2 1/2 inch pipes.

i used a 90 degree elbow to point out the side and i used a bolt hole in the spring hangers to mount the exhaust hangers.

the other side clears the fuel tank no problem

[Irish_Alley]

wish i had a good cell phone back when i had my 86 on the road. had my exhaust 45 before the rear tires and had 6" tips on it. this was behind headers with glass packs. she was loud

[Scowling]

I know this topic is old. But instead of starting a new thread I thought I'd add on to this. What would you guys recommend for space clearance between fuel tank and exhaust tip?
I have a '86 c3500 cab and chassis. my exhaust is all rotted out too and I'm wanting to either do dual side exhaust or 45 dump in front of the rear axle. Just don't want to run the exhaust too close to the dual fuel tanks

[Irish_Alley]

On my 86 I ran my tips probably about a inch under the tanks. Now these were 5 or 6" tips

[Captkaos]

Mine have about 3/4" of clearance here:

[Scowling]

Thanks for the info guys. I didn't want to do something stupid and end up flying down the highway in a ball of flames

[warwagon85]

Here the set up I've always had.  Once with converters.  I just had the exhaust redone minus converters.

[cubicdollars]

I dumped mine right below the step on my stepside, it's loud as heck but awesome!!


Sent from my iPad using Tapatalk