73-87 Chevy _ GMC Trucks > Power Windows & Door Locks
84 gmc stepside- window wiring
(1/1)
Bnisson:
HI ,
I have been totally re storing a 84 step side GMC. New wiring harness does not come with power window wiring( who knew)
Therefore I have been studying the diagram attached.
I don't understand the driver door switch. I don't have 2 tan wires coming out of that switch. One for each door. How do I work around this and whats the easiest way to feed new wiring through the door jam into the cab?
Thank you.
VileZambonie:
You are showing a power window circuit modified to utilize relays and it is unnecessary. Take a look here:
http://forum.73-87chevytrucks.com/smforum/index.php?topic=36005.0
Bnisson:
Hi Everyone-
Need help with the window wiring. I am trying to wire the windows per the below attachment. It shows 2 tan wires coming out of the drivers window switch. I only have one. Therefore, where or how do I resolve the new wiring of the window switches with the relays that are shown on this diagram with one tan wire. I have the other motor wires cut and re wired and power wires done but I am a bit confused on the 2 tan wires and how that works
Thank you.
First time Poster
Navigation
[0] Message Index
Go to full version