Author Topic: Paint cost  (Read 1525 times)

Offline nsml97

  • Newbie
  • Posts: 5
  • Newbie
Paint cost
« on: October 13, 2021, 11:23:55 AM »
Hello from New York.

New to the site been lurking around since i picked up my 1977 K10 about a month ago.  Lots of great info here!  Budgeting for different parts of my restoration project and I'm looking for some ideas of what I should be expecting to pay for paint.  This truck is very clean with very little surface rust no through rust anywhere.  Looking to change from brown to black or red with clear coat. Looks like a color change will be a pain though because the color carries through to the interior A posts and roof.  Maybe it's not a great idea?  Any info or advice is appreciated.

Thanks!

Offline Shifty

  • Junior Member
  • ***
  • Posts: 952
  • I bleed Bowtie red...
Re: Paint cost
« Reply #1 on: October 13, 2021, 12:56:05 PM »
How long is a piece of string?  Just ribbing... :D

It's going to come down to how nice of a paint job you're looking for.  If you are looking for the nicest paint job you can have done, but still be a "driver", I'd wager it's going to cost more than 8k.   Maybe it will differ in the NE. 

Welcome from Tucson, AZ! 
87 V20 Standard Cab Longbed (current)

87 R30 3+3 Longbed (days of yore)

98 C2500 ext cab longbed

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2557
  • Old Goof
Re: Paint cost
« Reply #2 on: October 13, 2021, 03:11:17 PM »
Nice find!

I think your truck is the same as the '80 I'm finishing up. Search on this site "that 1980 I keep talking about" you will see the firewall with that color under clear coat. It has fine metal flake and it's really beautiful.

Color change is a LOT of work and $$.
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2557
  • Old Goof
Re: Paint cost
« Reply #3 on: October 13, 2021, 03:13:55 PM »
Sorry, just checked, try "that 1980 c10"
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2557
  • Old Goof
Re: Paint cost
« Reply #4 on: October 13, 2021, 08:37:36 PM »
For some reason it's not linking as well as it used to, pry more similar posts.

Here's the link: http://forum.73-87chevytrucks.com/smforum/index.php?topic=38182.msg324547#msg324547

Pretty sure it is the color of your truck "Dark Carmel Poly"
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline nsml97

  • Newbie
  • Posts: 5
  • Newbie
Re: Paint cost
« Reply #5 on: October 14, 2021, 07:31:31 AM »
Thanks for the replies!  That does look like the color of my truck.  It looks really sharp.  I will probably stick with the existing color.  Great job with the project. 

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2557
  • Old Goof
Re: Paint cost
« Reply #6 on: October 14, 2021, 12:42:35 PM »
Thanks, I was going to do a color change until I saw the real color.

She's been quite a project, got delayed by another project that fell into my lap 2 years ago, but I'm done with it and off she goes... ::)

https://www.oldbug.com/67johnmic.htm

looking to drop the motor in a few days, will post more pics.
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction

Offline Scott91370

  • Newbie
  • Posts: 48
  • Newbie
Re: Paint cost
« Reply #7 on: December 23, 2021, 03:02:37 PM »
I know I'm late here but you can figure starting about $8k and going up from there depending on how nice and straight you want it.
If you have someone that will do an OK job it could be less, maybe $5k.

Offline 1980K20

  • Frequent Member
  • **
  • Posts: 296
  • Newbie
Re: Paint cost
« Reply #8 on: December 29, 2021, 09:12:12 PM »
Nice truck!

You'll find paint is expensive, but the big cost is in the labor. My opinion is to find your painter and work out an agreement. My next truck, I'll paint myself and save a bucket of cash, if I can convince myself to have the patience to do it and am willing to live with newbie imperfections. If you can do it yourself, hooray!

Sent from my SM-G965U using Tapatalk

--------------------------------------
1952 International L112 - waiting for EV conversion
1967 Camaro - 250 six cyl, 200-4R
1980 K20 4x4 Fleetside - 350 SBC roller Cam, TH350

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2557
  • Old Goof
Re: Paint cost
« Reply #9 on: December 30, 2021, 08:06:55 PM »
Yes, labor is the biggest cost factor!

It's really easier than it looks.

I shot my first restoration, 1967 Olds Toronado, in the alley behind my apartment in 1982.

Quiet part of the day, no traffic, my buddy watering the parking lot to keep the nibs down.

Turned out great, with great credit going to my auto shop teacher who showed me the technique of consistent spacing between the gun and your car/truck.

I'm sure Youtube is full of talking heads that can show you the tricks of the trade.
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction