Author Topic: Single wire 6 port fuel valve  (Read 1377 times)

Offline CA Big Red

  • Registered Users
  • *
  • Posts: 156
    • Big Red Squarebody
Single wire 6 port fuel valve
« on: October 26, 2021, 12:45:23 AM »


ISO this single wire six port fuel valve selector.

I am understand now that this wasn’t something I wanted to have had break. I can’t just go get another one.

Anyone have any thoughts on how or where to go to pick one of these up. I’d prefer brand new…but I get that this might end up being a good used one.

any direction here would be appreciated.


Sent from my iPhone using Tapatalk
"You don't know what you don't know."

1978 Scottsdale Stepside
383 w/ 4" lift & 35" BFG

Offline LILT77

  • Newbie
  • Posts: 28
  • Newbie
Re: Single wire 6 port fuel valve
« Reply #1 on: October 26, 2021, 05:10:12 PM »
Mine had the 3 port one before I removed it. Try looking up ACDelco #467513
77 C10/Big 10 Cheyenne "Old Blue"
81 C2500 Sierra Grande "Gramps"

Offline CA Big Red

  • Registered Users
  • *
  • Posts: 156
    • Big Red Squarebody
Re: Single wire 6 port fuel valve
« Reply #2 on: October 27, 2021, 09:39:18 PM »


But mine has six…


Sent from my iPhone using Tapatalk
"You don't know what you don't know."

1978 Scottsdale Stepside
383 w/ 4" lift & 35" BFG

Offline CA Big Red

  • Registered Users
  • *
  • Posts: 156
    • Big Red Squarebody
Re: Single wire 6 port fuel valve
« Reply #3 on: October 27, 2021, 09:39:45 PM »



Sent from my iPhone using Tapatalk
"You don't know what you don't know."

1978 Scottsdale Stepside
383 w/ 4" lift & 35" BFG

Offline CA Big Red

  • Registered Users
  • *
  • Posts: 156
    • Big Red Squarebody
Re: Single wire 6 port fuel valve
« Reply #4 on: October 27, 2021, 09:40:01 PM »



Sent from my iPhone using Tapatalk
"You don't know what you don't know."

1978 Scottsdale Stepside
383 w/ 4" lift & 35" BFG

Offline LILT77

  • Newbie
  • Posts: 28
  • Newbie
Re: Single wire 6 port fuel valve
« Reply #5 on: October 28, 2021, 05:57:54 PM »
The part number I listed is for the 6 port
77 C10/Big 10 Cheyenne "Old Blue"
81 C2500 Sierra Grande "Gramps"

Offline CA Big Red

  • Registered Users
  • *
  • Posts: 156
    • Big Red Squarebody
Re: Single wire 6 port fuel valve
« Reply #6 on: October 30, 2021, 04:21:50 PM »
The part number I listed is for the 6 port
But nobody has it.


Sent from my iPhone using Tapatalk
"You don't know what you don't know."

1978 Scottsdale Stepside
383 w/ 4" lift & 35" BFG

Offline dartresurector67

  • Newbie
  • Posts: 5
  • Newbie
Re: Single wire 6 port fuel valve
« Reply #7 on: February 07, 2022, 08:13:32 PM »
I had the same thing happen to me. I tried getting the modern FV5 motorized 6 port valve but gave up when I couldn’t get it to work with one wire. Ended up getting two 3 port solenoid valves from summit and just daisy chaining a positive line from the sending valve to the return valve and it worked great for the carb & mechanical pump.
However, the cheap 3 way valves are not rated for fuel injection pressures, so I had to circle back to the new modern valve. It was super easy to figure out, after I found this gem. Check this thread out.

http://www.barthmobile.com/eve/forums?a=tpc&s=7031072951&f=3431087061&m=4303955787&r=6213934197#6213934197


Sent from my iPhone using Tapatalk

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 18980
Re: Single wire 6 port fuel valve
« Reply #8 on: February 08, 2022, 07:49:59 AM »
Did you read any of the threads here on this subject?

http://forum.73-87chevytrucks.com/smforum/index.php?topic=37007.0

,                           ___ 
                         /  _ _ _\_
              ⌠¯¯¯¯¯'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10