73-87 Chevy _ GMC Trucks > 73-87 Chevy & GMC Trucks
Starter bolts
JohnnyPopper:
--- Quote from: bd on August 12, 2022, 08:19:15 PM ---No. The 1/2" bolt hole is already larger in diameter than the tap for the 3/8" Helicoil. If the substitute starter suggestion posted previously isn't workable, contact Timesert to see whether they offer a solution.
--- End quote ---
Did you mean the '1/2" bolt hole is larger than the drill size for a 3/8" Helicoil'? ;D
bd:
JP, I meant exactly what I wrote. A 3/8" Helicoil tap will fall through a 1/2" hole. ;)
I don't believe an off-the-shelf 3/8" Timesert will work either, but they may offer a custom solution.
Of course, the easiest solution would be to use a starter with the alternate mounting configuration if the block is machined to accept it.
Shifty:
OP, is this the "thru-hole" in the block? I've seen my share of longer bolts that just had a nut on them.
zieg85:
https://www.emisupply.com/catalog/topaz-reducing-bushing-steel-male-threaded-p-39654.html
Shifty:
Nice one Zeig! 8)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version