73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => 4 Wheel Drives => Topic started by: Fourxbob on January 20, 2017, 10:53:13 AM

Title: Frankentruck.
Post by: Fourxbob on January 20, 2017, 10:53:13 AM

(https://uploads.tapatalk-cdn.com/20170120/5af92b6b01cbbc944573d000fa374f7d.jpg)(https://uploads.tapatalk-cdn.com/20170120/a352b160b649407490996f0aa3642033.jpg)
Having trouble finding the repair kit needed. Its in an 84 gmc k1500 4x4 front driveshaft. But of course 84 wont fit it. Any ideas on what year its from would be appreciated.

Sent from my LGL44VL using Tapatalk

Title: Re: Frankentruck.
Post by: Fourxbob on January 20, 2017, 11:27:18 AM

It's stamped CV-82 if that means anything

Sent from my LGL44VL using Tapatalk

Title: Re: Frankentruck.
Post by: 1967KaiserM715 on January 20, 2017, 12:55:03 PM

What transfer case?


Sent from my iPhone using Tapatalk

Title: Re: Frankentruck.
Post by: Fourxbob on January 22, 2017, 09:05:14 AM

Not sure at the moment its either the np205 or 203 I have to drive in four loc because its a full time fourwheel drive.

Sent from my LGL44VL using Tapatalk

Title: Re: Frankentruck.
Post by: Irish_Alley on January 22, 2017, 03:26:23 PM

thats a 1st design driveshaft pre 77. it bolts onto a yoke on the front of the transfer case. the 2nd design is stronger and will have a flange on it.

Title: Re: Frankentruck.
Post by: Irish_Alley on January 22, 2017, 03:29:01 PM

http://forum.73-87chevytrucks.com/smforum/index.php?topic=30344.0 i have a part number or two at the bottom of that page.

Title: Re: Frankentruck.
Post by: Irish_Alley on January 22, 2017, 04:42:45 PM

updated the list i had. with new links and got napa link to work

Title: Re: Frankentruck.
Post by: Fourxbob on January 30, 2017, 08:30:24 PM

Thanks man. Ive been to all parts stores here in town. Even machine shops. Nobody has a can help. I really do appreciate the help

Sent from my LGL44VL using Tapatalk

Title: Re: Frankentruck.
Post by: Irish_Alley on January 31, 2017, 10:27:24 AM

i had that style on my mud truck, i rebuilt it with that 612 kit from napa. then after snapping a bolt or two on the yoke i decided i really hatted that style and the bolts were hard as heck to tighten and keep tight. i took another 205 apart and swapped some of the guts out so i could have the flange style.

youre welcome for the help, thats what most of us are here for

Title: Re: Frankentruck.
Post by: Fourxbob on September 13, 2017, 05:25:10 AM

Finally got it ordered and installed.

Sent from my LGL44VL using Tapatalk