« previous next »
Pages: [1]   Go Down

Author Topic: Need advice  (Read 2713 times)

Offline BiggG74

  • Newbie
  • Posts: 40
  • living in the pacific northwest
Need advice
« on: January 07, 2017, 05:11:46 PM »
Have a question, and sure it's been asked before.  But I have a 76 GMC 1/2 ton 2WD with 15 inch rims. It's stock for now. They have developed a leak and so I want to order a set of steel rims. My question is this.  How wide can I go without having issues of tire rub on the inside of fenders? Thanks in advance.


Sent from my iPhone using Tapatalk
Logged

Offline VileZambonie

  • Global Moderator
  • Senior Member
  • *****
  • Posts: 19022
Re: Need advice
« Reply #1 on: January 07, 2017, 05:17:42 PM »
You have to consider width, offset, backspacing to get the correct answer but typically 8.5" up front and 10" wide in the rear

Try this https://www.customwheeloffset.com/tire-wheel-backspacing-offset-calculators
Logged
,                           ___ 
                         /  _ _ _\_
              ⌠ŻŻŻŻŻ'   [☼===☼]
              `()_);-;()_)--o--)_)

74 GMC, 75 K5, 84 GMC, 85 K20, 86 k20, 79 K10

Offline BiggG74

  • Newbie
  • Posts: 40
  • living in the pacific northwest
Re: Need advice
« Reply #2 on: January 08, 2017, 01:32:01 AM »
Thanks. And thanks for the link.


Sent from my iPhone using Tapatalk
Logged

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18375
    • http://www.73-87chevytrucks.com
Re: Need advice
« Reply #3 on: January 08, 2017, 02:11:46 PM »
Read this link in addition to the information Vile posted.

http://forum.73-87chevytrucks.com/smforum/index.php?topic=25405.5
Logged

Offline BiggG74

  • Newbie
  • Posts: 40
  • living in the pacific northwest
Re: Need advice
« Reply #4 on: January 08, 2017, 04:06:22 PM »
Thanks for the help.


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »