73-87chevytrucks.com

Technical Forum (Read Only) => Accessories and Body Tech => Topic started by: pcmcobra on August 30, 2006, 10:18:00 PM

Title: 89-91 grill swap links/Info
Post by: pcmcobra on August 30, 2006, 10:18:00 PM

I'm in the middle of a deal with a guy, hoping to get his 91 core support and grill setup, and want to put this on my 86.
I am not home, so I can't look at my truck, will be out of town for another week, my question is, What will I need tyo remove to install my new core support and grill? Do the fenders/hood need to come off?
thx

Edited by: roundedline at: 9/3/06 9:31 am

Title: updated front end
Post by: 77c15 on August 30, 2006, 10:16:00 PM

Check out www.hillshotrods.com and look at some of the projects they've done with the conversion. I would say that it would be a good idea to pull apart the entire front end, just to make it easier to line up and install. Also, you can align the fenders and hood better after they install if you do so during the re-installation. Good luck!
-Mike

Title: Re: updated front end
Post by: roundedline on September 02, 2006, 10:35:00 AM

you can look here too:  www.coloradok5.com/grilleswap.shtml Part numbers are listed...

Chris Lucas
www.73-87chevytrucks.com
www.captkaoscustoms.com
Project Su
Jimmy 2WD Project

Title: Re: updated front end
Post by: toplessblazer on September 02, 2006, 01:43:00 PM

I think these links should be put in the tech section. This subject comes up a lot.