73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Interior & Equipment => Heating, Ventilation & Air Conditioning (HVAC) => Topic started by: ehjorten on June 28, 2021, 02:59:23 PM
-
So I need to have a couple of custom A/C Hoses made for my '91 LS Conversion to get the A/C all buttoned up and ready to charge. Can someone tell me what the thread designations are on each of these? I don't have my truck next to me to measure, so I'm not sure what sizes everything is. I assume they are some standard thread size of some sort.
-
Clarifying you mean as in Donor LS compressor to the Factory 91 Dryer Line?
I am not near my house but...
-
I have a comparable sized Sanden Compressor (comparable to the stock sized compressor) mounted to my 2004 LQ4 in a high mount passenger side, that will route to the stock A/C system on my '91 V3500. I have a new, sealed accumulator, a new, sealed condenser, new, sealed evaporator. I also made a new high side line with a R134a port because the stock one didn't fit to the "stock" replacement condenser.