Author Topic: Diesel or Gas swap  (Read 4242 times)

Offline nfenner86

  • New Users
  • Posts: 2
  • Newbie
Diesel or Gas swap
« on: December 04, 2016, 04:35:15 PM »
Hey guys! So I'm having a dilemma here. So I want too see people's opinions and I need some help. I'm gonna be building my 85 chevy k10 from the frame up. What I have on it right now is just a 4inch lift and 38s just on the frame. But instead of putting a 350 in it. I wanted to put a diesel in it like a 6.2 or a 12v cummins. So how much more is involved in this swap and what do I need to change/add to it.

Offline 1967KaiserM715

  • Junior Member
  • ***
  • Posts: 914
  • 1985 GMC K1500 w/ 6.5 TD
Re: Diesel or Gas swap
« Reply #1 on: December 04, 2016, 04:58:03 PM »
for the 6.2, not much, depending on transmission, should be pretty much bolt up, re-route a couple wires for power, and done, if you want to turbo the 6.2 or even drop in a 6.5, you will need to custom make a crossover and down-pipe...that is it. Take a look here, I am almost done with my truck, swapped out the 305, with a 1997 6.5 TD, converted to mechanical injection. I also ditched the 700r4 and installed a SM465, hopefully next year I can find a NV4500.

for the Cummins, your looking at bell-housing adapters, engine mount adapters, possible other clearance issues with cab and radiator, custom exhaust. I think the engine cross-member needs to be tweaked as well to fit the Cummins oil pan. I'm not real positive on Cummins swap stuff.
Current Vehicles:1985 GMC K10(Daily) 1991 GMC K2500(Daily) 1975 Beetle(not running) 1985 Mercedes 300D(not running) 1952 M35    1967 M715(not running)
 1986 Chevy K30(under repair)

Offline Captkaos

  • OWNER and Administrator
  • Administrator
  • Senior Member
  • *****
  • Posts: 18392
Re: Diesel or Gas swap
« Reply #2 on: December 05, 2016, 10:38:23 PM »
This is my post on swapping from a gas to 6.2L diesel.,11328.0.html

Offline legendman

  • Newbie
  • Posts: 8
Re: Diesel or Gas swap
« Reply #3 on: December 06, 2016, 09:25:08 AM »
I did a 6.2 to 6bt swap a few years ago, any questions ask away.

88 K3500 Crew cab dually 6.2 Diesel TH400 NP205
83 K20 Plow truck  6.2 Diesel TH350 NP205

Offline Irish_Alley

  • Tim
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 13319
  • Family is not an important thing. It's everything.
Re: Diesel or Gas swap
« Reply #4 on: December 17, 2016, 08:28:40 AM »
we do have a cummins swap section now also. ive done 1 swap on my crew cab and help a buddy do one on his crew cab. i used the gm motor mounts in their stock location. but this required the trans to be pushed back 3" so new shafts. you want a trans with od or you might only see 55-60 and she wont be liking it.

my buddy is a welder and fabricator and he also has a 13 speed in his truck and he made it 4x4. if i had to do it over again i would get a complete cross member made just for the swap and it utilizes dodge cummins motor mounts and the trans stays in the same spot so dont need new shafts
If you canít tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes