Author Topic: 1980 C10 stepside wheel/tyre combo - will they fit  (Read 2763 times)

Offline Silky

  • New Users
  • Posts: 1
  • Newbie
1980 C10 stepside wheel/tyre combo - will they fit
« on: May 09, 2019, 02:27:30 AM »
Rear 305/50R20 on 20x10 ET0
Front 255/55R18 on 18x8 ET0

Any drama with this?

Offline Rapid Roy

  • Junior Member
  • ***
  • Posts: 640
  • Euless, Texas
Re: 1980 C10 stepside wheel/tyre combo - will they fit
« Reply #1 on: May 09, 2019, 06:22:34 AM »
Welcome
1974 Cheyenne 10 LWB STOCK 350 W HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice

Offline JohnnyPopper

  • Senior Member
  • ****
  • Posts: 2647
  • Old Goof
Re: 1980 C10 stepside wheel/tyre combo - will they fit
« Reply #2 on: May 09, 2019, 05:42:02 PM »
Welcome From So Cal!

https://tiresize.com/height-calculator/

Looks like your rear is 32" tall, sidewall is 6", and your tread width is 12"

I'm rebuilding a 1980 C10, and there is a lot of room in the rear, but you should measure yours.

It also will depend on the wheel and where the depth of the center line mounting plate is, relative to the overall width of the wheel.

Get your straight edge and tape out...
1957 Apache 3100 235 Inline 6, 3 on the tree
1973 C-20, 3+3 454 4BBL TH400  Water Injection
1978 K-10, 350 4BBL TH350 NP203 M.M. Part time Kit/Hubs
1980 C-10 under construction