3 inch drop spindles

[square81]

Hey guys,
I got a great deal on a lowering kit. 3 inch spindles and 4 inch hanger and shackle kit. My question is with the drop spindles. Will there be fitment issues with my 15 inch rally wheels? Will cutting of the control arm need to be done? Never done this before and figured someone here will have some insight on this. Any pics would be great too. Thanks

[Scott91370]

If you're running factory wheels you are going to have fitment issues unless you have a spacer or trim   My the weights on my wheels would hit the control arm with 2.5" spindles. 

[LILT77]

If the spindles were 2.5" I'd say you got a 50/50 shot of them working depending on the brand of spindle and wheels. Mine worked fine. 3" though? I highly doubt they will fit. Also, I would heavily recommend against cutting or grinding the lower control arm.

[square81]

Thank you for the info guys. Everything I was reading never gave me a solid answer. Dont really want to mess with the control arm much at all.  I'll see if I can trade or sell these and buy something different. Thanks again