78 c10 350 stock
Snapped a lug stud on the front drivers side, and realized that the whole hub and disc is one assembly (and cheapish). The brake pads were cracked and the calipers/hoses were original, the bushings (all of them) are cracked and total junk. Rather than press out the stud and replace it I just decided to replace/rebuild all the major issues.
I'm just looking for a stock/slightly better than stock ride quality while lowering the front end a bit to reduce fender gap.
I have ordered Napa Premium hub/discs, ACDelco UCAs, drop shocks, beltech 2"drop coils, sway bar bushings, calipers, hoses, and pads.
I found affordable LCAs at 150 per side. Are they worth it or should I just replace the bushings and ball joints here?
Is there anything else I should be replacing while I'm down there?