73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Engine/Drivetrain => Topic started by: Mike81K10 on January 10, 2024, 01:12:18 PM
-
Does everyone balance their Crankshaft rotating assembly? I need to get a crankshaft turned or buy a new one in an engine I am building and was wondering about balancing.
-
I did, back when I had stuff machined, cheap insurance.
-
I cannot find anyone in my area that will balance the crankshaft rotating assembly and now I am thinking about buying a balanced assembly. It is a shame, since all I need is the crankshaft worked. If I start buying new parts I will end up going much further with it.
-
In all fairness, Ferris Bueller did say "you can never go too far..." 8)
-
Check with
Wilkerson Racing Engines
phone: (256) 232-3295
Address: 13750 Mooresville Rd, Athens, AL 35613
Website: http://wilkersonracing.com
Huntsville Engines
phone: (256) 858-6026
Address: 100 Von Braun Drive Northwest Huntsville, AL 35806
-
Thanks!
-
Ooooh Mike will have the racin' engine! 8)
-
Where do you live Mike?
-
I would never use a machine shop that can't.
-
I would never use a machine shop that can't.
Hear! Hear!
-
I am in Central AL and am looking at moving north eventually. I am house hunting! I have a new crankshaft ordered and it is supposed to come in today. I am also looking at new 202 intake heads and a cam. I already have 10.1 pistons and my engine is bored to a 357.
-
If you are going to recam with high flow heads, migrate to a roller and rev kit.