Author Topic: 80 C10 SWB "The Ruby Build" (Read 13346 times)

Thompson335 · « **Reply #75 on:** February 26, 2022, 08:10:34 AM »

sorry about the quality of the pics.
ask any question you want. I am glad to help.

1980K20 · « **Reply #76 on:** February 28, 2022, 11:14:07 PM »

Great progress! I'm not good at body work, always like to see others make progress!

Crazy, but any chance you can get a picture of the lower clips that hold on the door panels? I can't get mine on. No worries if your panels are still on or the clips are already gone.

Thanks! Mark

matty1965 · « **Reply #77 on:** March 01, 2022, 09:56:55 PM »

Really interested in doing the swap after seeing how it turned out. Do you have any pictures of the lower rear control arm mounts? Just curious how you attached them and where they landed on the frame

Thompson335 · « **Reply #78 on:** March 02, 2022, 01:10:36 PM »

Very simple home made bracket with a urethane bushing . bolted on the side and bottom.
Bottom hole is slotted to allow for caster adjustment. I modified the frame to make a flat surface to mount because of how low I went.
i am sure there is more than 1 way to do it.

Thompson335 · « **Reply #79 on:** March 02, 2022, 01:29:38 PM »

Doing a little more work. wanted a better universal way to mount just about any kind of seat that I found in the junk yard that I might like. currently i am running maximia seats with a dodge center section.