73-87chevytrucks.com
Technical Forum (Read Only) => Drivetrain => Topic started by: Captkaos on March 17, 2015, 09:29:21 PM
-
Pictured are a HD dropped spindle and a std stock spindle. Note the HD takes a 1.25" rotor and the std takes a 1" rotor. All 1973-1980 trucks had 1.25" rotors, the 1" rotor was introduced in 1981. They take different calipers and bearings. Measurements are shown for comparison. The drop spindle is 2.5"
(http://www.73-87chevytrucks.com/techinfo/spindles/StdvsHDspindle1.jpg)
(http://www.73-87chevytrucks.com/techinfo/spindles/StdvsHDspindle2.jpg)
(http://www.73-87chevytrucks.com/techinfo/spindles/StdvsHDspindle3.jpg)
(http://www.73-87chevytrucks.com/techinfo/spindles/StdvsHDspindle4.jpg)
(http://www.73-87chevytrucks.com/techinfo/spindles/StdvsHDspindle5.jpg)
(http://www.73-87chevytrucks.com/techinfo/spindles/StdvsHDspindle6.jpg)
(http://www.73-87chevytrucks.com/techinfo/spindles/StdvsHDspindle7.jpg)