73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Body, Glass & Paint => Topic started by: philo_beddoe on May 07, 2018, 08:17:59 AM
-
Why on this side only does the hood not level even with the fender? Iv'e tried nuthin, and i'm all out of ideas. How do i fix this? Driving me crazy! The problem was not there prior to bodywork and paint. So how all of a sudden could it be the hinges? The hood was removed for paint and this fender was replaced. Is something out of whack?!
(https://uploads.tapatalk-cdn.com/20180507/7d998a2d7cb5ca4426686b57f67bf2a2.jpg)
-
Did you adjust the hinge to fender bolts? If you push down on the hood does it sit correctly?
-
Did you adjust the hinge to fender bolts? If you push down on the hood does it sit correctly?
Yes i can push down on the hood then it sits right. But slowly comes back up.
-
Did you replace the hinges?
-
No.
-
Well there ya go.... that's why your hood is lifting.
-
Ok, i'll get some new hinges on there and get back to you. Whats a good source? Site store? Other truck catalog, is there a local place?
-
Try Jegs just be careful with the springs, mask off the area and lay a few towels over the fender in case you launch one into space.
-