73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => LT/LS Swaps => Topic started by: luketaylor0 on September 25, 2014, 12:28:57 AM

Title: 82 k10 6.2l, swapping to 5.3L
Post by: luketaylor0 on September 25, 2014, 12:28:57 AM
need to know what will be necessary in regards to torque converter mating to flex plate of 5.3, will I need another torque converter? my guess is yes, has a 700r4 in it, anybody run into this? thanks
Title: Re: 82 k10 6.2l, swapping to 5.3L
Post by: Captkaos on October 09, 2014, 09:34:12 PM
You will need a early 6.0L crank spacer.