All Classified forums require a Site Supporter subscription. It is only $25 per year and you can buy and sell whatever you like on the forum. To become a Site Supporter, go to Your Profile and select "Paid Subscriptions."
It looks like I need to supply power to the brown wire and then the dark blue wire. The pink wire should be the main power feed to the plug. Then from there electricity goes to either the blue wire, or the brown wire. Depending on if you press up, or down. Does this sound about right?
Quote from: Ben_Olddermin on August 30, 2022, 02:34:50 AMIt looks like I need to supply power to the brown wire and then the dark blue wire. The pink wire should be the main power feed to the plug. Then from there electricity goes to either the blue wire, or the brown wire. Depending on if you press up, or down. Does this sound about right?Unfortunately, you have to separate the glass along with its attached lower sash from the regulator. It's not an easy task, but necessary to verify the glass isn't binding in the channels.I think you would be better served by making voltage drop measurements with everything connected as designed from the factory to determine whether voltage is being wasted across connections, wire, switches, etc. Just remember to make the measurements while the system is operating and not static.