73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => LT/LS Swaps => Topic started by: CA78C10 on May 30, 2019, 10:27:47 PM

Title: 78 RCSB 2wd C10 6.0 Swap New Question
Post by: CA78C10 on May 30, 2019, 10:27:47 PM
Might be a dumb question but will the stock 6.0 Oil Pan fit my 78 C10, it's got a 350 3 speed now. I'm gonna start getting all needed parts.
Title: Re: 78 RCSB 2wd C10 6.0 Swap New Question
Post by: Rich84 on May 31, 2019, 09:23:13 AM
It will fit fine . It will hang a little below the crossmember. It depends what mounts you use. Might be a little risky with a lowered truck. Mine sits about an inch and a half below. No big deal at stock height. 
Title: Re: 78 RCSB 2wd C10 6.0 Swap New Question
Post by: Rapid Roy on May 31, 2019, 10:46:00 AM
Welcome
Title: Re: 78 RCSB 2wd C10 6.0 Swap New Question
Post by: CA78C10 on June 01, 2019, 05:32:54 PM
It will fit fine . It will hang a little below the crossmember. It depends what mounts you use. Might be a little risky with a lowered truck. Mine sits about an inch and a half below. No big deal at stock height. 
Not planing on lowering it. Thanks!
Welcome
Thanks! Imma be in here quite often in the coming month's