Author Topic: Behind the seat Cardboard Tool Box (Read 926 times)

Geezer77GMC · « **on:** August 16, 2022, 10:49:50 AM »

Finally made a storage tray to replace the fiber board boxes that don't hold up for me. I had some thin oak boards left over from a Grandfather clock case build. Boards were planed to 0.3" and edge joined for width. Corners are screwed and glued using a 7/16" square stick for durability. My favorite upholsterer covered the outside with a dark vinyl and the inside with Velcro-able style carpeting. A small dot of Velcro hook on the bottom of a tool box will keep it from moving around. The whole thing attaches to the cab using Velcro strips.