Author Topic: Seat Belt Issues  (Read 2888 times)

Offline Unofficial

  • Frequent Member
  • **
  • Posts: 348
Seat Belt Issues
« on: April 01, 2009, 12:26:07 PM »
My shoulder belt seems to locked up, but my lap belt comes out freely. The passenger belt doesn't do this, only the driver's side. The problem is obviously in the plastic housing of the retractors, but I wouldn't know what to do after taking it off. Does anybody have any similar problems or suggestions? Thanks.
1987 Custom Deluxe R10
350 TBI bored .040 over
700r4 with a Transgo shift kit
MSD ignition
Long tube headers w/ true duals
Upgraded sound system w/ subwoofer

Offline GoatBeard

  • Frequent Member
  • **
  • Posts: 267
Re: Seat Belt Issues
« Reply #1 on: April 01, 2009, 02:34:18 PM »
I assume it is the same or similar to the 83 K5 mechanism.  You probably already know this, but there is a black button that sticks out the backside of the seatbelt mechanism which your door will hit when it closes.  This button is what locks it. When that button is released the seatbelt should release.  You might check to see if that button is broken or stuck.  I can take pictures if you need them.

It's not really hard to get off, so you may take it off just to inspect it and/or clean it.  Sometimes the button will get bent or it'll push it sideways.