« previous next »
Pages: [1]   Go Down

Author Topic: Bench seat fit  (Read 3736 times)

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Bench seat fit
« on: January 29, 2018, 06:41:40 PM »
Have an 83’ scottsdale c10. Looking to put a bench seat in. Will a 77’ seat fit? This is the 77’ seat

« Last Edit: February 01, 2018, 03:12:25 PM by Irish_Alley »
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7543
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Bench seat fit
« Reply #1 on: January 29, 2018, 08:27:22 PM »
can't see the pictures but if it is a stock seat from a 1977 into a 1983, yes it will bolt in.  The drawbacks are the seat belts would go between the seat back and bottom, not through the bottom like the 83.  Now the belts will be tight and if you need the seat up at all or you not skinny you may not get the belt buckled.
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Rapid Roy

  • Junior Member
  • ***
  • Posts: 635
  • Euless, Texas
Re: Bench seat fit
« Reply #2 on: January 29, 2018, 08:28:43 PM »
No pics to see. Welcome to the site.
Logged
1974 Cheyenne 10 LWB STOCK 350 W HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Bench seat fit
« Reply #3 on: January 29, 2018, 08:50:21 PM »
https://ibb.co/mSwTDm
https://ibb.co/jdoKKR

Another image host hopefully this works.
I have 94’ suburban seats in it presentyl and theyre fine. But I want thr bench seat I prefer that look. I bought it with the suburban seats, so...
« Last Edit: January 29, 2018, 08:54:42 PM by AmericaMade »
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline AmericaMade

  • Newbie
  • Posts: 32
  • Newbie
Re: Bench seat fit
« Reply #4 on: January 30, 2018, 02:04:13 PM »
Quote from: zieg85 on January 29, 2018, 08:27:22 PM
can't see the pictures but if it is a stock seat from a 1977 into a 1983, yes it will bolt in.  The drawbacks are the seat belts would go between the seat back and bottom, not through the bottom like the 83.  Now the belts will be tight and if you need the seat up at all or you not skinny you may not get the belt buckled.

I uploaded a new pic... if you say it will work Im going to go for it. I gather the bolt pattern is the same from 73-87
Logged
1983 C10 Scottsdale 383 Stroker TH/350 Holley 850 Double pumper carb

Offline zieg85

  • Global Moderator
  • Senior Member
  • ****
  • Posts: 7543
    • 73-87 GM squarebody extended cab and conversions up to 91 R/V series
Re: Bench seat fit
« Reply #5 on: January 30, 2018, 02:10:52 PM »
it will bolt in and sit correctly
Logged
Carl 
1985 C20 Scottsdale 7.4L 4 speed 3.21
1986 C10 under construction
https://www.facebook.com/groups/248658382003506/

Offline Irish_Alley

  • Tim
  • Global Moderator
  • Senior Member
  • *****
  • Posts: 13319
  • Family is not an important thing. It's everything.
Re: Bench seat fit
« Reply #6 on: February 01, 2018, 03:14:03 PM »
fixed the top post so you can see the images without clicking on the link. click "modify" to see what i did. but i right clicked on the image then copied the image address and put that in the image code
Logged
If you can’t tell yourself the truth, who can you tell it to?~Irish_Alley

When you have eliminated the impossible, whatever remains, however improbable, must be the truth ~Sherlock Holmes
Pages: [1]   Go Up
« previous next »