73-87chevytrucks.com
73-87 Chevy _ GMC Trucks => Performance => Topic started by: winningz on November 25, 2013, 11:56:29 PM
-
My spark plug in the back is arcing to my header. ??? its the fourth one closest to the cab on the driver side. 1978 chevy k10
-
Is there a question there somewhere? ???
On the left (driver's) side of the engine the cylinders are numbered front-to-rear, 1-3-5-7; and on the right (passenger's) side front-to-rear, 2-4-6-8. So, you're telling us the #7 spark plug wire is arcing to the exhaust.
How much clearance (in inches) do you see between the wire and the header? Post a pic.
-
ha sorry got all worked up. theres zero clearance, it is touching the header. cant get the dang thing off now its stuck to the header. will post a pic brb
-
Here is the pic. It is touching the header and I can't get it off now
Sent from my DROID RAZR using Tapatalk
-
You need to dimple the header pipe to produce an air gap between the wire and the pipe. Try to find a shorter "header" spark plug - Accel (http://www.summitracing.com/parts/acc-0576s-4/overview/make/chevrolet/model/c10/year/1978) markets them. Replace the damaged spark plug wire. Sparingly smear some dialectric grease (http://www.summitracing.com/parts/umi-22058/overview/) inside the spark plug boot before connecting it to the plug. Pick up and install Nomex spark plug sleeves (http://www.summitracing.com/parts/dei-010503/overview/) on the business ends of the plug wires. Be careful when removing the wires in the future, so as not to tear the boots.