1975 4-link/tire combo

[bnokle]

I'm looking for a 4-link or ladder bar setup for my c-10 that bolt's in too weld up after.  i mainly need the bracket's on the frame and I can do the rest from there.  Also if i tub it too the frame and use the stock width diff.  What off set/rim size/tire size can i squeeze in there?

[shaved80]

i don't get why you'd want a 4link that bolts in...to weld in? but here's a bolt-on 4link, you can just plug the bolt holes... www.fbirides.com/product.asp?idno=3991

[RSBAD454]

what do you want it for.....drag racing or air bags? check out Chris Alstons chassis works for a street/strip setup.

Toys are my game

[bnokle]

i should have put that in there.  i mainly want it for the drag's.  i'm not much of an airbag guy.

Thanks

[RSBAD454]

this is what you want with the chrome moly rod ends. You can buy a whole quality kit for about 1400.

Toys are my game

Edited by: RSBAD454  at: 10/8/05 1:04 am