73-87chevytrucks.com
General Site Info => General Discussion => Topic started by: zieg85 on November 08, 2018, 07:46:16 PM
-
My truck doesn't have factory AC as it is just a plain work truck. I have a 6 position switch off then 1-5. My blower works on 4 and 5 only. I am thinking it is the fan resistor but usually just the highest position works. Am I on the right track or should I be looking to replace the fan switch.
-
Just a blower relay I take it??? I don't see the resistor like our truck have.
-
Yes there is a resistor and it is most likely your issue. See #5
-
Thanks Vile!!! I will locate it and check it out. Looks to be under the dash passenger side
-
know on my 02 ive had issues with the resistors and the connector. but unlike you i have 1-4 and Hi doesnt work unless i wiggle the connection. but the resistors are a known issue and will overheat
-
know on my 02 ive had issues with the resistors and the connector. but unlike you i have 1-4 and Hi doesnt work unless i wiggle the connection. but the resistors are a known issue and will overheat
my luck I will have a burnt up plug it... On a positive note I snagged a very nice topper today.
-
well at least you have that going for you lol
-
Thanks Vile!!! I will locate it and check it out. Looks to be under the dash passenger side
$29+ later I have all speeds now. Thanks Vile!!!