« previous next »
Pages: [1]   Go Down

Author Topic: No power to tank selector switch  (Read 1356 times)

Offline highrig

  • New Users
  • Posts: 1
  • Newbie
No power to tank selector switch
« on: September 27, 2018, 07:22:13 AM »
Hi. New member!  Need some help.  I just purchased a 85 k10 and cannot get any power to the pink wire going to the selector switch.  I tested the continuity and the wire has no brakes in it.  There is no power coming out of the fuse box were the wire plugs in.  Any suggestions? Thanks.
Logged

Offline Henry

  • Frequent Member
  • **
  • Posts: 331
Re: No power to tank selector switch
« Reply #1 on: September 28, 2018, 01:53:12 PM »
Hi Highrig:
I dont have knowledge of the selector switch on models as late as yours, but I can only suggest to check all your fuses and then follow that pink wire through the fusebox to wherever it comes from. Is there anything else that is electrically not working?Check your grounds as well.
Regards,
Henry
Logged

Offline Rapid Roy

  • Junior Member
  • ***
  • Posts: 635
  • Euless, Texas
Re: No power to tank selector switch
« Reply #2 on: September 28, 2018, 03:24:50 PM »
Welcome
Logged
1974 Cheyenne 10 LWB STOCK 350 W HEI /TH350/AC/4 BBL Quadrajet
Mopar by Birth
Chevy by Choice
Pages: [1]   Go Up
« previous next »