73-87 Chevy _ GMC Trucks > Electrical

Fire wall wire tray

(1/3) > >>

Swampyankee74:
I'm having a hard time finding a place to purchase a new wire holder that goes along the top of the firewall. Does anyone know where I can find this? For a 1974 gmc c1500

Swampyankee74:
Pic

Sent from my SM-S515DL using Tapatalk

Mike81K10:
I got one from a salvage yard. You may find one this is not necessarily from your model vehicle. Other vehicles may have one that will work if you look around.

JohnnyPopper:
Mike is pry right, but I really doubt you'll find a stock replacement.

You can use the corrugated plastic tube with a split.

While you're at it, lower the entire harness to follow the sheet metal going over the bell housing.

Will be a lot cleaner, cause that is just UGLY... ;D

VileZambonie:
As far as I know, they are not and never were reproduced. My 74 looked like that too and I tossed it 25 some odd years ago. 73-74 were the long ones and after that I'm pretty sure they went to the short one for the remainder of the years. Since yours is all thereish you can reproduce it or try and repair it.

Navigation

[0] Message Index

[#] Next page