73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Performance => Topic started by: 1badazz84 on August 02, 2009, 09:01:53 PM

Title: will it work
Post by: 1badazz84 on August 02, 2009, 09:01:53 PM

Can anyone help me on this, I got 305 V8 I just got a Edelbrock performer plus cam & intake 2701 EPS I'm going to buy the time chain 7800 for it. It says on the card inside I need to get the sure seat valve springs #5802 I'm wonder if the stock springs would work kit.I like some good answers on this.

Title: Re: will it work
Post by: 355shortbed on August 04, 2009, 05:12:26 PM

the specs on the cam would help or part number

Title: Re: will it work
Post by: 76 k10 on August 05, 2009, 10:45:32 PM

if its the performer plus cam stock springs will work. that cam is more of a rv cam. why dont you go with a comp or isky?

Title: Re: will it work
Post by: joesgarage71 on August 07, 2009, 08:28:41 PM

With any engine that has 70K miles or more, installing a new cam I would check the spring heights and pressures if your using your stock springs.Or save the trouble get new ones.