TODAY is a Great Day to visit our Store and order the parts you need for your truck!
Use a blazer filler setup
Wolf, check out my build for the Blazer tank in Members Rides. Might give ya some ideas.
Why not find a 81 to 87 truck and cut out the passenger side and weld it in or buy a duel tank bed if you can find one cheap at a salvage yard. You cannot put a drivers side door on the passenger side, it will open in the wrong direction. You said you have the wiring worked out. However, it might make it easy to buy the duel tank wiring harness from the salvage yard as well, along with the tank switch, tank selector valve, and etc. As you mentioned you are concerned about the selector valve. The 1987 truck had fuel injection and in tank pumps. The ideal thing would be to get everything from a donor 1987 or perhaps find a 1987 for a base to build from.There are some others with much more experience on this forum that may have some better Advice. Hope I was at least a little helpful.
Quote from: VileZambonie on February 23, 2021, 03:03:30 PMUse a blazer filler setupDoesn’t the blazer’s flat floor allow more room for the filler neck? Or am I overthinking that and it can reach across under the bed and just come up at a slight angle between the inner and outer bedside?