73-87chevytrucks.com
Technical Forum (Read Only) => Heating and Air Conditioning => Topic started by: bd on June 29, 2019, 01:46:02 PM
-
Adjusting the A/C-Heater Temperature Control Cable:
Referring to the diagram...
- Remove the glove box door assembly.
- Loosen (do not remove) the temperature control cable attachment screw (#241) located on top of the heater core case (VIEW B).
- Make sure the temperature control cable (#240) is properly installed and retained at both ends (#242) with its spring ferrule fully seated in the yoke of the cable bracket (VIEW B).
- Slide the temperature control knob on the dash control panel (#243) all the way to the COLD position and hold it there, forcing the cable firmly against the temperature door lever (#244), compressing the cable spring.
- Tighten the temperature control cable attachment screw (#241).
- Reinstall the glove box door assembly.
(http://forum.73-87chevytrucks.com/smforum/index.php?action=dlattach;topic=37117.0;attach=51235;image)
For a straightforward procedure on adjusting the A/C Mode - Blend Door Link, see the technical article: How to: Adjusting the 1977-1987 (91) A/C Mode Door - Blend Door Link (http://forum.73-87chevytrucks.com/smforum/index.php?topic=37539.msg314250#msg314250).