73-87chevytrucks.com

General Site Info => Welcome => Topic started by: whz on January 09, 2018, 07:28:55 PM

Title: 1986 K10 in Georgia
Post by: whz on January 09, 2018, 07:28:55 PM

Hi all

Been around squares for a long time, learned to drive my fathers early 1970s Cheyenne, which was later traded for 1982 C10, followed by 2 builds of street rods with 350 small blocks.  Been around Chevys since I had diapers.

Fast forward to now, been looking passively years until I came across this rig. Not the best of shape paint wise with a few dents here and there as a farm truck in its previous life, but runs great.  Starts right up, drives smooth & most of all. FUN to drive and get to share the story of how I found it, lol.

It has 128k original miles with numbers matching 305 coupled with 4 speed manual (3 with low). I will slowly restore it when time allows.

I am sure I’ll be asking questions on where to find good parts.

Eric (aka Whz)

(https://uploads.tapatalk-cdn.com/20180110/ab2e7218f3cc3892e29ff8843981aea7.jpg)


Sent from my iPhone using Tapatalk

Title: Re: 1986 K10 in Georgia
Post by: bd on January 09, 2018, 08:40:22 PM

Welcome to the site from Central California.

Title: Re: 1986 K10 in Georgia
Post by: Jason S on January 10, 2018, 11:14:03 AM

Welcome from Kansas

Title: Re: 1986 K10 in Georgia
Post by: zieg85 on January 10, 2018, 02:01:38 PM

Welcome from the St. Louis, MO area!

Title: Re: 1986 K10 in Georgia
Post by: Irish_Alley on January 31, 2018, 08:54:52 PM

welcome from maryland

Title: Re: 1986 K10 in Georgia
Post by: Rapid Roy on January 31, 2018, 09:21:38 PM

Welcome from DFW area Texas