Hello everyone. So yesterday my starter started clunking intermittently while trying to start it. I replaced the starter to find that i have a new issue. When i go to start it, the starter engages fine and starts to spin the flywheel for a brief second then makes a bunch of clicking sounds and barely moves the flywheel. I've pretty much ruled the battery out. It has 12.8 volts and i jumped the starter by hooking cables directly from the battery to the starter and starts just fine. I cleaned the wire connectors on both the battery and starter and ensured they were tight. I'm stumped because nothing changed in the equation besides the starter but the new starter has the 3 posts (battery, s, and r) where as my old one only had the 2 but fron what ive read, it shouldn't matter. And yes the ignition wire is connected to the "s" part.