73-87chevytrucks.com

73-87 Chevy _ GMC Trucks => Engine/Drivetrain => LT/LS Swaps => Topic started by: dogfacedsoldier on September 14, 2018, 07:41:39 AM

Title: Recommend fly by wire LS pedal for '85 C10
Post by: dogfacedsoldier on September 14, 2018, 07:41:39 AM

O.K., LQ4 is installed and running.  The pedal that I picked up from second hand came out of a Mustang conversion (my LQ4 conversion engine and tranny came out of a wrecked 1990s Mustang (no joke).  I don't care for the pedal. 

For the guys who have installed a fly by wire LS swap, which pedal did you use? 

I am 6'3", so something a little closer to the firewall wouldn't hurt. 
Title: Re: Recommend fly by wire LS pedal for '85 C10
Post by: ehjorten on September 14, 2018, 08:26:53 AM
Use the Chevy truck pedal with the 6.5 Diesel!  It bolts right up to the firewall in the stock location!!!  You only need to swap 2 pins in the connector at the pedal for it to work.  I got mine for a 1999 6.5 TD.

Check-out my LS thread here: http://forum.73-87chevytrucks.com/smforum/index.php?topic=34079.30

Start at reply #43 for the DBW pedal stuff.
Title: Re: Recommend fly by wire LS pedal for '85 C10
Post by: Rapid Roy on September 14, 2018, 09:03:27 AM
Welcome.