All Classified forums require a Site Supporter subscription. It is only $25 per year and you can buy and sell whatever you like on the forum. To become a Site Supporter, go to Your Profile and select "Paid Subscriptions."
hey guys im in a bit of a pinch. I bought some weld racing wheels 15x8 in fronts and 15x10 in rear. I dropped the fronts 5 inches with 2inch cpp drop springs and 3inch drop spindles and i have no issues with the fronts, however in the rear i recently did a djm 5inch flip kit and now my rear tires are rubbing against the rear fenders pretty bad. the size tires i have are 295/50/15 in the rear. unfortunatly i bought the wheels from craigslist and i have no clue on the backspacing. I just need some input on what directions i should go in order to not make it rub. Couple options comes to mind of getting smaller tires (275/60/15), air shocks, rolling fenders, and somebody also suggested to convert to rear disc brakes setup where the disc brakes will narrow the track width, not sure how thats possible but i put it out there. any suggestions welcome. as for narrowing the rear end, If theres a cheap alternative to bolting up a narrow rear end without much modification, im all for it. if the rear sit at least 3/4 narrowed it will sit perfectly.